The G15 series GripSeal quick sealing plug injects driving pressure into the rear drive hole to push the housing forward, thereby squeezing the sealing ring at the front end, creating a smooth, rough, and porous design. Threaded and various irregular pipe fittings with leak free internal connections are highly suitable for high-volume automated production testing.

Specification and parameters of G15 series automatic tube inner diameter sealed quick connector：

Drive Method：Pneumatic | Semi automated | Fully automated
Testing media：Air testing, gas testing, liquid testing
Max operationpressure：From Vacuum to 8 Bar
Sealing range：8.5mm~44mm
Minimize insertdepth: BS1,BS2:15m        BS3,BS4: 25mm
Termination port: G1/8,G3/8 thread hole
Main material: aluminum alloy/stainless steel
Main seal：Neoprene/silicone/Nitrile rubber
Pilot pressure: 4-6Bar
Operationtemperature: -20℃~120℃

Advantages and characteristics of G15 series quick sealing connectors：

1. Reduce overall manufacturing costs and maximize production capacity through more effective high integration automation testing

2. Drive the piston to squeeze the sealing ring through the intake hole to achieve tight sealing

3. Fix the connector onto the fixture through the two fixing holes at the tail end to achieve automated operation

4. The straight through design and G-thread test hole will not have any impact on the flow rate

5. Built in limit ring to limit the maximum displacement of the piston and prevent the sealing ring from overloading and bursting out

Application case of G15 series GripSeal quick sealing plug：

Motor waterway testing	motor controller	Carbon canister	fuel pump	condenser