The G10D series GripSeal pneumatic quick seal connector features a compact size, high flow rate, and pneumatic drive. It is equipped with dual cylinders and double thrust to ensure more stable sealing. The bottom of the joint is equipped with G1/8 drive holes, and the side is equipped with M5 drive holes. Users can choose to use them according to their needs. The two air paths are completely identical, and the standard product comes with an M5 plug cap. Compared to the standard G10 series, the G10D series has a smaller outer diameter, making it particularly suitable for environments with limited space.

Specifications and parameters of G10D series quick sealing connectors

Drive Method：Pneumatic | Semi automated | Fully automated
Testing media：Air testing, gas testing, liquid testing
Max operationpressure：From Vacuum to 10 Bar
Sealing range：0.8mm~28mm
Minimize insertdepth: 15mm
Termination port：G1/8, G3/8, G1/2 threaded holes
Internal sealing ring： Nitrile rubber
Primary sealing ring：Neoprene/silicone
Pilot pressure：4-8Bar
Operationtemperature： -20℃~120℃

Advantages and characteristics of G10D series quick sealing connectors：

1. Automated testing stabilizes the entire testing process and maximizes production efficiency.

2. Through double thrust technology, G10D provides strong thrust while maintaining a small outer diameter, ensuring sealing stability.

3. Side fixed fluid hole reduces the disturbance caused by internal movement of the plug, which is more conducive to maintaining the stability of the plug.

4. The high flow testing hole fully ensures the flow rate during liquid testing.

5. The smaller outer diameter makes it more suitable for use in space constrained automation scenarios.

Application Cases of G10D Series：

motor controller	Carbon canister	fuel pump	condenser