The G15 Pro series GripSeal series quick sealing plug, compared to the G15 series, has added a magnetic intelligent sensor externally, which can more accurately track the driving status of the plug and the expansion of the sealing ring, effectively eliminating incorrect connections caused by insufficient sealing and significantly improving the efficiency of automated detection.

Specification and parameters of G15Pro series automatic tube inner diameter sealed quick connector：

Drive Method：Pneumatic | Semi automated | Fully automated
Testing media：Air testing, gas testing, liquid testing
Max operationpressure：From Vacuum to 8 Bar
Sealing range：8.5mm~35mm
Minimize insertdepth: BS1,BS2:15m        BS3,BS4: 25mm
Termination port: G1/8 thread hole
Main material: aluminum alloy
Main seal：Neoprene/silicone/Nitrile rubber
Pilot pressure: 4-6Bar
Operationtemperature: -20℃~120℃

Advantages and characteristics of G15ro series quick sealing connectors：

1. Suitable for instantaneous connection of smooth, rough, porous, threaded, and various irregular pipe fittings.

2. By setting the position of the sensor, it can be determined in advance whether the connection is in place.

3. Drive the piston to squeeze the sealing ring through the intake hole to achieve tight sealing.

4. Fix the connector onto the fixture through the two fixing holes at the tail end to achieve automated operation.

5. The straight through design and G-thread test hole will not have any impact on the flow rate.

6. Built in limit ring to limit the maximum displacement of the piston and prevent the sealing ring from overloading and bursting out.

Application case of G15Pro series GripSeal quick sealing plug：

Motor waterway testing	motor controller	Carbon canister	fuel pump	condenser