G25P series mini low pressure connector is used for fast sealing and connection of inner bore and pipe bore with interference in operation space Internal expansion seal is adopted, with compact and compact overall structure and low economical cost. The main seal is the inner hole and tube hole interfered by the operating space. This type of joint can only provide the only gripping force by the sealing ring. Therefore, it has only "sealing" characteristics and has no gripping characteristics. Therefore, it cannot be contacted with any liquid during use. The sealing surface must be dry, clean and oil-free.

Note: This series of products can only be used for plugging, and cannot be used for the test application of gas or other liquids.

G25P Series Mini Quick Seal Connector Specifications and Parameters：

Drive Method：Handle operation
Testing media：Used for plugging
Sealing range： 10.5 mm~2.5 mm
Fluid interface:  nothing
Main material:  Stainless steel
Main seal ring：Neoprene/Buna-N
Operating pressure：From vacuum to 3bar
Operating temperature:  -20℃~120℃

Advantages and characteristics of G25P series Sealing joint：

1. The structure is simple, the failure rate in the use process is reduced, and the daily maintenance is convenient.

2. Small size and light weight, suitable for fast sealing of pipe hole and inner hole in confined space.

3. Rugged stainless steel body significantly increases the life of the fitting.

4. A variety of seal ring materials are available. The cylindrical seal ring has a large sealing area and excellent sealing performance, which will not damage the customer's products.

Application of G25P Series Quick-Connects：

Engine waterway test	Battery pack liquid cooling water plate	Motor controller leakage test