The G20A series GripSeal straight tube quick seal connector adopts a low-pressure external sealing design, suitable for airtight testing below 3Bar. By expanding the sealing ring to form a radial sealing surface, a good sealing effect is ensured without causing damage to the appearance of the tested part. The handle operation is simple and convenient, and is equipped with an adaptive adjustment spring, which facilitates the adjustment of the compression amount of the sealing ring, thereby expanding the applicability of the connector.

Specification and parameters of G20A series automatic tube inner diameter sealed quick connector：

Drive Method：Handle operation
Testing media：Air testing, gas testing
Max operationpressure：From Vacuum to 3 Bar
Sealing range：0.8 mm~23 mm
Fluid interface: 1/8''BSPP，G3/8''BSPP thread hole
Main material: aluminum alloy/Nylon handle
Main seal：Fluororubber/Nitrile Rubber
Operationtemperature: -20℃~120℃

Advantages and characteristics of G20A series quick sealing connectors：

1. Outsourced sealing will not cause scratches on the test fittings, and the sealing is stable and reliable

2. Aluminum alloy body+nylon handle, lightweight, sturdy, wear-resistant, reducing operating intensity

3. The adaptive adjustment spring can automatically adjust the sealing pressure according to different pipe diameters

4. Easy maintenance, no need for tools to disassemble and replace sealing rings, etc

Application case of G20A series GripSeal quick sealing plug：

Engine cooling water pipe	Battery pack liquid cooling water plate	Sealing test of process fittings